Kramer Electronics VP-773AMP User Manual
Page 47
42
VP-773AMP - The Display Modes
The dual window mode appears in the following preset PiP configurations:
Picture-in-Picture, with a smaller PiP
window superimposed over a full main
window image
Picture + Picture, where both images
appear side-by-side and the aspect
ratios of both images are maintained
Split, where both images are placed
side-by-side with the same height
The window customization feature (see
Section
) lets you customize the dual
window mode layout (main window and PiP window) to any size and position.
You can superimpose any input type over any or the same input.
If the HDMI signal is HDCP protected, it can appear on HDMI and
HDBT outputs that are connected to supported HDCP compliant
displays. However, it cannot appear on a display that is not HDCP
compliant and will show a green screen instead.
i