Kramer Electronics VP-773AMP - Manual (Page 10)

VP-773AMP – Overview 5

Scaled Outputs
– 2 HDMI outputs and an HDBaseT TP output
simultaneously
 HDBaseT™ technology with a bandwidth of up to 6.75Gbps (2.25Gbps per
graphic channel)

Up to 130m (430ft) normal mode; up to 180m (590ft) Ultra mode (1080p
@60Hz @24bpp) when using BC-DGKat623 cables
For optimum range and
performance, use Kramer's BC−DGKat524,
BC−DGKat623 and BC−DGKat7a23 shielded twisted pair (STP)
cables. Note that the transmission range depends on the signal
resolution, graphics card and display used. The distance using
non−Kramer CAT 5, CAT 6, and CAT 7 cables may not reach these
ranges.

Output Resolutions – HDTV and Computer Graphics up to 2K and
1080p/UXGA with selectable refresh rates

Multiple Aspect Ratio Selections – Follow input, follow output, best fit,
letterbox

Multi-Standard Video support - NTSC (3.58/4.43), PAL (M/N/60) and SECAM

Built-in Time Base Corrector - Stabilizes unstable video sources

Built-in Proc-Amp with enhanced functions such as color correction, gamma
and dither

Input and output audio level adjustment

Balanced stereo audio inputs, with two unbalanced microphone inputs, as
well as digital stereo and balanced stereo outputs

Selectable Microphone talkover or mix modes

A built-in 2x10W power amplifier with speaker outputs on a 4-pin terminal
block connector

Automatic detection and selection of the HDMI and DP embedded audio.
The VP-773AMP automatically outputs the signal from the HDMI and DP
embedded audio inputs or performs an analog takeover to output the
respective analog audio input

Selectable Power Save modes for energy efficient usage
i