Kramer Electronics VM-114H2C User Manual
Page 9
6
VM-114H2C - Overview
#
Feature
Function
1
IR Remote Control Sensor
Sensor for the remote control IR transmitter
2
IR LED
Lights yellow when receiving signals from the IR
remote control transmitter
3
REMOTE IR 3.5mm Mini Jack
Connect to a remote IR sensor
4
EDID Buttons
READ
Button
Press (when one of the input LEDs is flashing to
indicate a selected input) to read the selected EDID
(see
Section
5
SELECT
Button
Press repeatedly to cycle through the inputs to select
an input from which to read the EDID. The relevant
LED flashes (see
Section
6
OUTPUT 1~4 LEDS
The relevant LED lights green when an acceptor is
connected to the output
Also lights or flashes during EDID setup (see
Section
5.2)
7
POWER LED
Lights green when the unit receives power
8
INPUT SELECTOR Button
Press to select an input. The relevant IN 1 HDMI/IN
2 CAT5 LED lights
9
IN1 HDMI LED
Input LEDs
Lights green when HDMI input 1 is selected
10
IN2 CAT5 LED
Lights green when the TP CAT 5 input 2 is selected
11
RS-232 9-pin D-sub (F)
Connector
Connect to a PC or remote controller
12
12V DC Power Connector
Connect to the +12V DC power adapter, center pin
positive
13
IN1 (HDMI)
Input HDMI
Connector
Inputs
Connect to an HDMI source
14
IN2 (CAT5)
Input RJ-45
Connector
Connect to a TP source (for example, PT-571 HDMI
Line Transmitter, VM-114H2C or VM-114H4C)
15
OUT 1
HDMI
Output
Connectors
Connect to the HDMI acceptors
OUT 2
16
OUT 3
TP RJ-45
Output
Connectors
Connect to the TP acceptors (for example, PT-572+
HDMI Line Receiver, VM-114H or VM-114H4C)
OUT 4