Festo Контроллер крайних положений SPC11 - Manual (Page 13)

Contents and general instructions
XI Festo P.BE-SPC11-DNC-EN en 0012NH
Notes on the use of this manual
This manual contains special information on installing and
commissioning the SPC11 in conjunction with drive type
DNC-... .
General, basic information on the method of operation, on fit-
ting, installing and commissioning pneumatic drives with the
SPC11 can be found in the System manual P.BE-SPC11-SYS-... .
Manuals for the SPC11
Manual Title Contents
System manual
SPC11 Soft Stop electronics/
pneumatics P.BE-SPC11-SYS... General instructions on installation
and commissioning
Drive-specific supplement for oper-
ating the SPC11 with a certain drive,
e.g. the DNC-... (e.g. this manual) P.BE-SPC11-..-... Special instructions on installation
and commissioning as well as
parameter settings for the relevant
drive
1)
1) These manuals contain the permitted drive-valve combinations, drive diameters and mass loads
as well as the parameter settings of the SPC11 which are valid in these cases.
Please note
For installation and commissioning you will require the
System manual as well as the manual “Drive-specific
supplement” for the drive used.