Muxlab LongReach 3G-SDI to HDMI Extender Kit - Manual

© MuxLab Inc. 94-000692-A
8495 Dalton Rd, Montreal, Quebec, Canada. H4T 1V5
Tel: (514) 905-0588 Fax: (514) 905-0589
Toll Free (North America): (877) 689-5228
E-mail: [email protected] URL: www.muxlab.com
Specifications
Environment SDI single link: SD, HD & 3G.
Devices Monitors supporting the original SDI rate only.
Standard supported SMPTE 259M (270Mb/s), SMPTE 292M & SMPTE 424M.
Bit rates 270Mb/s, 1.485Gb/s & 2.97 Gb/s (automatic selection).
Video format supported
(monitor must support the
original SDI rate) SD: 525i, 59.94/60Hz & 625i, 50Hz
HD: 720p @ 60Hz, 50Hz, 30Hz, 25Hz & 24Hz
1080i @ 60Hz & 50Hz
1080p @ 30Hz, 25Hz & 24Hz
3G: 1080p @ 60Hz & 50Hz
Sound format
supported 48kHz @ 24 bit, 20 bit & 16 bit.
Indicators Power
SDI Sync (on rx side only)
RJ45 Sync
Video (on tx side only)
Sound (on tx side only)
HDMI Sync (on rx side only)
Connectors
On each unit One BNC 75 ohm female on source side.
One HDMI on receiver on receiver side
One RJ45S for Cat5e/6 unshielded twisted pair.
One power connector, 2mm.
Maximum Distance UTP Cat 5e: 330 ft (100 m) UTP Cat 6: 400 ft (122 m)
Maximum distance applies for all format and speed between boxes. On
SDI side: 450 ft (140m).
On HDMI side: 15 ft (5 m) typical.
RJ45 Pin Configuration
Use EIA/TIA 568A or
586B straight-through
wiring only.
RJ45 Link
Pin 1 (R)
Pin 2 (T)
Pin 3 (R) Pin 6 (T)
Pin 4 (R) Pin 5 (T)
Pin 7 (R) Pin 8 (T)
Cables
(Not included) One straight Cat 5e/6 twisted pair cables required.
One 75 ohm coaxial cables with 75 ohm BNC required.
One HDMI cable.
Power Supply
(Included) Two 100-240V/5VDC 6W power supplies with interchangeable blades
for NA, Europe and UK.
Power Consumption Transmitter: 4 Watts Receiver: 6 Watts
Temperature Operating: 0° to 40°C Storage: -20° to 85°C
Humidity: Up to 95% non-condensing
Enclosure 6061 Aluminum alloy
Dimensions 4.50” x 3.00” x 1.25” (11.4 x 7.6 x 3.2 cm)
Weight 2.5 lb. (1.1 kg)
Warranty 2 years
Order Information 500715 HD-SD to HDMI Extender Kit
HD-SDI to HDMI Extender Kit
500715
Quick Installation Guide
Overview
The HD-SDI to HDMI Extender Kit allows a HD-SDI source to be converted to a
HDMI signal and transmitted up to 330 ft (100m) via Cat5e cable in a point-to-point
configuration to a HDMI monitor. The kit supports transmission of up to 2.97/3.0 Gbps
uncompressed, digital video including digital sound within television facilities.
Applications
Applications include broadcast, commercial and residential AV systems, classroom
projector systems, digital signage, boardroom systems, and medical information
systems.