Muxlab LongReach CCTV IP PoE Extender Kit, 30W - Manual

© MuxLab Inc. 94-000758-A SE-000758-A © MuxLab Inc. 2014
8495 Dalton Road, Mount Royal, Quebec, Canada. H4T 1V5
Tel: (514) 905-0588 Fax: (514) 905-0589
Toll Free (North America): (877) 689-5228
E-mail: [email protected] URL: www.muxlab.com
Specifications
Environment PoE CCTV IP
Devices PoE CCTV IP cameras with a 10/100Mb/s Ethernet port, using up to
30 Watts.
Transmission Transparent to the user
Standard supported Ethernet side:
IEEE 802.3 10BaseT,
IEEE 802.3U 100Base-TX
IEEE 802.3at compatible PoE
PoE Power Class 3
Connectors One (1) BNC 75 Ohms.
One (1) RJ45S for Cat 5e/6 unshielded or shielded twisted pair.
LED Indicators Power, IP Traffic, 100MBps
Maximum Distance RG59/RG6: Up to 980 ft (300m) @ 100Mbps
UTP Cat 5e/6: Up to 330 ft (100 m)
Note: When installed in an electrically noisy environment, an STP
cable must be used. Also, cross-connection reduces the effective
distance depending on the grade of twisted cable used.
RJ45 Pin
Configuration
Reverse Polarity
Sensitive. Use EIA/TIA
568A or 586B straight-
through wiring.
RJ45 Link
Pin 1 (R) Pin 2 (T)
Pin 3 (R) Pin 6 (T)
Pin 4 (R) Pin 5 (T)
Pin 7 (R) Pin 8 (T)
Cable UTP/STP: One (1) Cat 5e/6 or better twisted pair cables required
RG59/RG6: 75 Ohms (avoid CCS cable)
Power Supply Optional Power Supply (110-240V/56VDC) minimum 40W.
Required at the Camera Side Device when coax cable quality or
length results in insufficient power reaching the camera. Required
at the Network Side Device when used with non-PoE environment.
Power Consumption Network Side: 1.82 Watt Camera Side: 1.73 Watt
Temperature Operating: 0° to 40°C Storage: -20° to 85°C
Humidity: Up to 95% non-condensing
Enclosure Metal
Accessories Wall-mount brackets included
Dimensions 4.37” x 2.95” x 0.99” (110 x 75 x 25 mm)
Weight 1.5 lb (0.68 kg)
Compliance Regulatory: FCC, CE, RoHS Flammability: 94V0
Warranty 2 years
Order Information 500112-30W CCTV IP PoE Extender Kit, 30W
LongReach CCTV IP PoE
Extender Kit, 30W
500112-30W
Quick Installation Guide
Overview
The LongReach CCTV IP PoE Extender Kit, 30W (500112-30W) allows one IP camera
(30 Watts) to be connected up to 980 ft (300 m) via a single 75-ohm coax cable in a
point-to-point configuration. The maximum distance depends on the grade and quality
of coaxial cable. An optional 48-56VDC (40W) Power Supply can be used if required.
Applications
CCTV IP surveillance
Installation
1. Identify the connectors on the Extenders as indicated on the product labels.
2. Attach the surface-mount brackets if required as shown below.