Muxlab Active VGA Balun Kit - Manual (Page 6)

© MuxLab Inc. VideoEase Active VGA Balun Kit Installation Guide
Page 6
Gain Adjustment Gain control via DIP switches on receiver (factory default setting: all OFF)
LED Indicators Transmitter: Power – One (1) green LED
Receiver: Power – One (1) green LED; Switch position: Four (4) green LEDs
Cable Category 5 or better twisted pair cable.
Requires additional VGA jumper cables (not included)
Power Supplies Two (2) 110-240V/12VDC/1.25A. Detachable AC power cords included.
12VDC power jacks
Temperature Operating: 0º to 40º C. Storage:-10º to 70º C. Humidity: up to 95% non-
condensing
Enclosure Black. ABS fire retardant plastic
Dimensions 4.5” x 3.8” x 1.25” (11.4 cm x 9.7 cm x 3.2cm)
Weight 3 lbs., 1.38 kgs
Mounting Desktop, rubber stand-offs.
Regulatory FCC/CE pending
Warranty
One (1) year
Order Information 500035: Active VGA Balun Kit, 110V
500036: Active VGA Balun Kit, 220-240V (Continental Europe power cord)