Push stick construction – SawStop CB73480 User Manual
Page 77
SawStop 10” Industrial Cabinet Saw 75
Push Stick Construction
This diagram illustrates a typical pushstick. Pushsticks should be constructed from material that is sturdy and electrically non-conductive such as scrap wood. Pushsticks should always be used when rip cutting pieces narrower than 6 inches.
Squares are 1”.
Pushstick should be 1/2” to 3/4” thick.
1 1/2"
1/2"
Cabinet Saw Manual 1st Reprint.i75 75
3/9/2010 8:33:11 AM