SawStop CB73480 User Manual
Page 5
SawStop 10” Industrial Cabinet Saw 3
Table of Contents
Using Your Saw
27
1. Adjusting the Blade Height:
27
2. Adjusting the Blade Tilt Angle:
27
3. Turning on Main Power and Starting the Motor:
28
4. System Status Codes:
30
5. Using the Saw in Bypass Mode:
33
6. Using the Blade Guard:
34
7. Using the Riving Knife:
35
8. Using the Miter Gauge:
35
9. Cross-Cutting:
37
10. Rip Cutting:
38
11. Changing the Brake Cartridge:
40
What to do if the SawStop Safety System Activates
45
Making Adjustments to Your Saw
46
1. Aligning the Table:
46
2. Aligning the Blade Elevation Assembly:
50
3. Aligning the Blade to the Tilt Axis:
52
4. Adjusting the Elevation Limit Stops:
56
5. Adjusting the Tilt Limit Stops and Tilt Angle Indicator:
58
6. Adjusting the Table Insert:
60
7. Aligning the Riving Knife and Spreader to the Blade:
62
8. Adjusting the Quick-Release Clamp:
64
9. Adjusting the Tilt Gearing:
65
10. Adjusting the Miter Gauge:
66
Cabinet Saw Specifications
67
Cabinet Saw Manual 1st Reprint.i3 3
3/9/2010 8:32:39 AM