Setting up your saw – SawStop CB73480 User Manual
Page 27
SawStop 10” Industrial Cabinet Saw 25
Setting Up
Your Saw
arbor should spin counter-clockwise when viewed from the right side of the saw.
Setting Up Your Saw
12. Disconnect Switch:
The saw is equipped with an electrical disconnect switch mounted on the left side of the cabinet. When the
disconnect switch is switched to OFF (see Fig. 19), electrical power is physically disconnected from both the
SawStop safety system and the magnetic contactor box. The disconnect switch should be switched to OFF
whenever performing any adjustments, maintenance or repairs to the saw, including changing blades, installing
or removing the blade guard and riving knife, etc.
Fig. 21
Fig. 20
Fig. 19
Cabinet Saw Manual 1st Reprint.i25 25
3/9/2010 8:32:47 AM