SawStop ICS73600 - Manual (Page 25)

SawStop 10” Industrial Cabinet Saw 23
Setting Up
Your Saw
WARNING! Some types of dust created by sawing, power sanding, grinding, drilling, and other construction activities contain
chemicals known to cause cancer, birth defects or other reproductive toxicity or harm. Some examples of these chemicals are lead
from lead-based paints, crystalline silica from bricks, cement, and other masonry products, and arsenic and chromium from chemically
treated lumber.
In addition, wood dust has been listed as a known human carcinogen by the U.S. government.
The risk from exposure to these chemicals and to dust varies depending on how often you do this type of work. To reduce your
exposure, work in a well ventilated area and work with approved safety equipment including dust masks or respirators designed to filter
out such dust and chemicals.
10. Connection of Dust Collection:
Your SawStop ® saw includes a dust shroud around the blade to provide superior dust collection to ordinary
saws. A flexible hose connects the dust shroud to a 4 inch diameter dust port on the exterior of the cabinet
(see Fig. 18). It is important to connect a suitable dust collection system to the dust port on the exterior of the
cabinet. All table saws generate a substantial amount of dust, which can be a serious physical hazard.
SawStop recommends the use of a dust collection system that provides at least 350 CFM of flow at the dust
port.
Setting Up Your Saw
Fig. 18 4” dust collection port
Industrial Cabinet Saw Rev. 2 Ma23 23 3/9/2010 8:38:38 AM