Silverline 45cc Petrol Chainsaw - Manual (Page 5)

4
GB
Description of Symbols
The rating plate on your tool may show symbols. These represent important
information about the product or instructions on its use
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Wear protective shoes
Read instruction manual
NO open flames!
Hot surfaces - DO NOT touch!
Be aware of kickback!
Toxic fumes or gases!
Caution!
Wear protective clothing
DO NOT use indoors or in closed spaces!
Risk of fire!
Risk of explosion!
NO one-handed use!
ALWAYS use chainsaws with both hands!
Chain Oil
Chain Brake
Conforms to relevant legislation and safety standards
Environmental Protection
Tools powered by petrol based internal combustion engines
must not be disposed of with household waste. Please recycle
where facilities exist. Check with your local authority or retailer
for recycling advice.
Specification
Engine
Type of engine: .............................................. 2-stroke petrol,
air-cooled
Type of carburettor:........................................ Walbro
Engine displacement:..................................... 45cm
3
Rated power output: ...................................... 1.8kW (2.41hp)
Max. engine speed: ........................................ 10,000min
-1
Engine idling speed range: ............................. 2800min -1 ±200min -1
Engine start speed with throttle lock .............. 2800min -1 ±200min -1
Engine speed with clutch engaged: ............... Min. 4000min -1
Max. engine power speed: ............................. 8000min -1
Max. chain speed: .......................................... 22.3m/s
Fuel:............................................................... 2-Stroke mix,
unleaded, 40:1
Fuel tank capacity: ......................................... 0.58L
Type of spark plug: ........................................ L7T/LD, L7RTC/Torch,
BM6A/Torch
Spark plug gap: ............................................. 0.65mm
Dimensions: ................................................... 410x235x265mm
(without guide bar and chain)
Net weight: .................................................... 5.5kg (without guide
bar, chain, fuel or oil)
Chain and guide bar
Sprocket: ....................................................... 7 Teeth x 9.525mm
Saw chain type: ............................................. Oregon
Saw chain pitch: ............................................ 9.525mm (
3 ⁄
8
")
Saw chain gauge: .......................................... 1.27mm (0.05")
Guide bar type: .............................................. Sprocket nose
Compatible guide bars:....................16" Oregon160SDEA041, included
18" Oregon 188PXBK095 (516481), optional
20" Oregon 208PXBK095 (546874), optional
Compatible saw chains:
With 16" guide bar:.....................................Oregon 91PX057X, included
With 18" guide bar: Oregon 21LPX072X, optional
With 20” guide bar: Oregon 21LPX078X, optional
Cutting length: ............................................... 385mm (16"), 445mm
(18"), 495mm (20")
Chain oil type: ................................................ Special saw chain oil
(bio-degradable)
Chain oil tank capacity: .................................. 0.25L
Oil feed system: ............................................. Adjustable automatic
oil pump
Sound and vibration information:
According to Machinery Directive 2006/42/EC:
Sound pressure L
PA
: ....................................... 96.0dB(A)
Sound power L
WA
: .......................................... 109.2dB(A)
Uncertainty K: ................................................ 3dB
Weighted vibration a
front_hv,eq
(front handle): ......... 8.39m/s 2
Weighted vibration a
rear_hv,eq
(rear handle): ....... 8.16m/s 2
Uncertainty K: ................................................ 1.5m/s 2
According to Outdoor Noise Directive 2000/14/EC:
Guaranteed sound power L
WA
: ........................ 114dB(A)
As part of our ongoing product development, specifications of Silverline products may
alter without notice.
The sound intensity level for the operator may exceed 85dB(A) and sound protection
measures are necessary.
242927_Z1MANPRO1(New Version).indd 4 12/12/2013 17:07