Rivera Primo SU Sportster KIT 1041-0064 - Manual (Page 17)

Slide the last hose clamp over the hose with the worm
screw out and facing down. Tighten the hose clamp. (It
is recommended to use an in-line fuel filter which is not
included in the kit).
Run the fuel hose through the frame and between the cyl-
inders making sure the hose is NOT touching any metal
surfaces. Cut the hose to the proper length.
Place the fuel hose (1099-0007) onto the fuel valve hose
barb and then secure with a hose clamp (1099-0008)
Finish installing the tank. Add fuel and take it for a test
spin! You may need to fine tune the carb after taking it for
a ride.
64
63
62
61