Australian Monitor DMA1 - Manual (Page 19)

P L AY L I S T O P E R AT I O N
PA G E 1 9 A M I S - D M A 1 I N S TA L L AT I O N & O P E R AT I O N M A N U A L
6.5 MPLL=11: Priority playlist
Operating mode:
• Upon activation of a logic input, the MP3 fi les in the playlist are
played in sequence. At the end of the playlist the DMA1 goes in
standby, awaiting further logic input activation. Activating the logic
input once again, or if the logic input remains active, the MP3 fi les
in the playlist are played again
• Repeated activations or deactivations of the same logic input or
of other inputs does not interrupt the playing of an MP3 fi le
• The playlist is looped, as long as the relative logic input
remains activated
6.6 MPLL=12: Stop & Play Standard playlist
Operating mode as MPLL=10 except:
• Repeated activations or deactivations of the same logic input does
not infl uence the playing of the current MP3 fi le. Only the activation
of a different logic input stops the current MP3 being played and
activates the fi rst MP3 fi le in the new playlist.
6.7 MPLL=13: Standard playlist
Operating mode as MPLL=11 except:
• Repeated activations or deactivations of the same logic input does
not infl uence the playing of the current playlist. Only the activation
of a different logic input stops the current MP3 being played and
activates the new playlist.
6.8 MPLL=14: Stop & Play Restart playlist
Operating mode as MPLL=10 except:
• When the same logic input is reactivated the current MP3 fi le
is restarted. The activation of a different logic input stops the
current MP3 being played and activates the fi rst MP3 fi le in the
new playlist.
6.9 MPLL=15 : Restart playlist
Operating mode as MPLL=11 except:
• When the same logic input is reactivated the playlist restarts from
the beginning. The activation of a different logic input stops the
current MP3 being played and activates the new playlist.