beautypg.com

Australian Monitor DMA1 User Manual

Page 17

background image

P L AY L I S T O P E R AT I O N

PA G E 1 7

A M I S - D M A 1 I N S TA L L AT I O N & O P E R AT I O N M A N U A L

6.1 Introduction to playlist mode operation

When the fl ash memory is inserted, the DMA1 analyses its content to

defi ne its mode of operation based upon the fi les present:

1.

File: PLAYLIST.TXT plays audio fi les in sequence according to the

list present in the fi le

2.

File: 1.M3U, 2.M3U, 3.M3U, 4.M3U, 5.M3U, 6.M3U, 7.M3U plays

audio fi les in sequence according to the list present, activated

by logic input

IN1 = 1.m3u

IN2 = 2.m3u

IN3 = 3.m3u

IN4 = 4.m3u

IN5 = 5.m3u

IN6 = 6.m3u

IN7 = 7.m3u

During play the four command buttons REW, STOP, PLAY and FWD

are active.

6.2 What is a playlist fi le?

The DMA1 is able to follow a sequence or list of audio fi les; this play list is

a simple text fi le called playlist.txt which can be inserted in the main

directory of the same memory containing the audio fi les.

Follow a few, easy rules to set the sequence:

Example

1

Example

intro

with

3

with

part 1

numbers: 7 names: part

2

9

monologu

5

music

01

part

3

005

fi

nale

IMPORTANT!

• Rename the MP3 audio fi les with numbers or names with

8 characters max.

• Do not write in the extension (.mp3)

• Max. 500 MP3 fi les per playlist

Insert the fl ash memory card and wait for the DMA1 to read the playlist.

At the end of the reading operation, if the names of the pieces have been

fi tted in correctly, the DMA1 will automatically start to play the MP3 fi les in

the programmed sequence or wait the activation of a logic input.

6.3 Playlist activation by logic inputs - MPLL (Mode PLayList)
parameter

The seven available playlists activated by the logic inputs, can be played

with different modes depending upon the varying needs.

To choose between the different modes of operation the confi guration

parameter MPLL (Mode PLayList) must be defi ned in the confi g.txt fi le.

When the fl ash memory card is inserted, the DMA1, depending on the

setting of the parameter MPLL in the fi le confi g.txt, will switch over to the

relevant mode of operation.

IMPORTANT!

• The names of the 7 playlists are fi xed

• The loading times of the Playlists may last even tens of seconds,

during which the DMA1 is not able to play