Australian Monitor DigiPage User Manual
Page 10
5 PROG LINKS
6 DATA LINK
7 MASTER/SLAVE
8 POWER IN VAC
These RJ45 sockets allow linking of the program sources when using a Master/Slave
configuration. (see ‘Linking Section’ on page 18)
This socket is used to link two units in a Master/Slave configuration. (see ‘Linking Section’ on
page 18)
This switch is used when linking 2 units in Master/Slave configuration. (see ‘Linking Section’
on page 18)
This 2.1mm power socket accepts the 20VAC power supply provided with the unit.
NOTE:
These are
Ethernet connections.
NOT
NOTE:
These are
Ethernet connections.
NOT
10
INSTALLATION SERIES
Australian Monitor