Avaya P117F(R) - Manual (Page 13)

Chapter 2 Installation
Table 2 Meaning of the P117F Front Panel Buttons
Button Function Meaning
Select The buttons determine what function will be displayed by the 17 Port
LEDs (the top two rows of LEDs).
The five Function LEDs (above the Select buttons) show which
function is currently displayed by the Port LEDs. The Port LEDs can
display either Link, Collision, Transmit, Receive or Full Duplex.
If, for example, the Link (LNK) LED is lit, then LEDs 1 to 17 will
display the Link status of every port.
(For P117FR ATM port LEDs, see also Table 4).
Press left or right button to toggle the Port LED display between functio
Reset Press and hold both buttons simultaneously for two seconds to reset
the entire P110 stack. In a Reset, all LED indicators turn on. Pressing
Reset does not affect configuration settings.
Table 3 Meaning of the P117F(R) Stackable Switch front panel LEDs
LED Indicator Function Status Meaning
PWR Power OFF
ON
Blink Mains power not connected
Mains power connected
Working on back-up power supply
NMA Agent OFF
ON No agent in this module
This module contains an active agent
RED NMA Reserved for future use
OPR CPU
Operation
OFF
Blink CPU is OK
CPU is faulty
Function LED Port LED (1 to 17)
LNK Link status OFF
ON
Blink once
Blink
twice Port Disabled
Port is enabled and link is OK
Link Test Fail
Partition (Ethernet only)
COL Collision OFF
ON No Collision (ATM is always OFF)
Collision occurred on line (Ethernet
only)
Tx Transmit to
line
OFF
ON
No activity
Data transmitted
Rx Receive
from line
OFF
ON
No activity
Data Received
FDX Half/Full OFF
Half duplex connection to port
P117F(R) Stackable Switch Installation Guide 11