ADTRAN Cable T1 ESF CSU ACE - Manual (Page 42)

Chapter 4. Operation
42 T1 ESF CSU Rackmount User Manual 61202066L1-1B
Status
The Status menus of the DATAMATE and terminal allow errors and
alarms to be viewed and error / alarm histories to be cleared. If an alarm
occurs after power up or after the history registers were last cleared, the
history registers are set again. Current errors/ alarms reflect only the
current status. For a discussion of the errors and alarms, see the Front
Panel section of Chapter 2: Physical Description. The terminal STATUS
menus and the DATAMATE STATUS tree are shown in Figures 4-12
through 4-15.
Figure 4-12. Display of Terminal Status Selection
Figure 4-13. Terminal Status Display
T1 ESF CSU STATUS
1 CLEAR HISTORY
2 DISPLAY STATUS
3 LOCAL PERFORMANCE
T1 ESF CSU STATUS DISPLAY
CURRENT ERRORS/ALARMS RESULTS HISTORY ERRORS/ALARMS
NI RX LOS = YES NI RX LOS = YES
NI RX AIS = NO NI RX AIS = YES
NI RX OOF = YES NI RX AIS = YES
NI RX YELLOW = NO NI RX AIS = YES
NI RX CVS = NO NI RX OOF = YES
NI RX BPVS = NO NI RX YELLOW = YES
Tl RX LOS = YES NI RX CVS = YES
Tl RX AIS = NO NI RX BPVS = YES
Tl RX OOF = YES NI RX LOS = YES
Tl RX YELLOW = NO NI RX AIS = YES
Tl RX CVS = NO NI RX OOF = YES
Tl RX BPVS = YES NI RX YELLOW = YES
SELF TEST = PASS NI RX CVS = YES
SOFTWARE REV = REVISION B NI RX BPVS = YES
CHECKSUM = C919