Disassembly & reassembly, Required tools disassembly – Goulds Pumps 3100 - IOM User Manual
Page 33
DISASSEMBLY & REASSEMBLY
REQUIRED TOOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
DISASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
INSPECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
REASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
POST ASSEMBLY CHECKS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
ASSEMBLY TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
PARTS LIST WITH MATERIALS OF CONSTRUCTION. . . . . . . . . . . . . . . . . . . . . . 35
REQUIRED TOOLS
DISASSEMBLY
▲
!
WARNING
Pump components can be heavy. Proper
methods of lifting must be employed to avoid
physical injury and/or equipment damage.
Steel toed shoes must be worn at all times.
▲
!
WARNING
The 3100 may handle hazardous and/or toxic
fluids. Proper personal protective equipment
should be worn. Precautions must be taken to
prevent physical injury. Pumpage must be
handled and disposed of in conformance with
applicable environment regulations.
NOTE: Before disassembling the pump for
overhaul, ensure all replacement parts are
available.
▲
!
WARNING
Lock out power supply to driver motor to
prevent accidental startup and physical injury.
1.
Shut off all valves controlling flow to and from
pump.
▲
!
WARNING
Operator must be aware of pumpage and
safety precautions to prevent physical injury.
2.
Drain liquid from piping, flush pump if
necessary.
NOTE: To perform maintenance on
mechanical seal only, it is not necessary to
disassemble auxiliary piping to the casing.
3.
Disconnect all auxiliary piping or tubing.
Loosen
and remove motor mounting bolts.
3100 IOM 1/97
25
6
•
Open end wrenches
(1/4”, 5/16”, 3/8”, 9/16"
1/2”, 5/8”)
•
Soft face hammer
•
Lifting sling
•
Torque wrench with sockets
•
Breaker bar extension
•
Dial indicator
•
Spanning type puller
•
Cleaning agents