Allied Telesis AT-2931SX - Manual (Page 117)

AT-29xxSX Series Gigabit Ethernet Network Adapters Installation Guide
117
DOS Prompt Commands
Table 8 lists the DOS prompt commands.
Table 8. DOS Prompt Commands
Command Description
-c Specify adapter to be tested and/or
modified
-cmd Enter command mode
-w Enable/Disable (value = 1/0) WOL in
manufacture mode
-mba Option to select MBA protocol
0 = Disable
1 = Enable
-mbap Option to select MBA protocol
0 = PXE
1 = RPL
2 = BOOTP
-mbas Option to select MBA speed
0 = auto
1 = 10HD
2 = 10FD
3 = 100HD
4 = 100FD
6 = 1000FD (fiber)
-firm Update devices eeprom based on name> image match to HW
-ver Version of the current software/
eeprom.bin
-pxe Programming PXE firmware from file
-elog Output error to log file