Pathway DMX QConnect Software for CR Manual - Manual (Page 28)

DMXQConnect for CR - User Guide Command Reference
25
Use the standard Windows 95 file management conventions to specify where
you want the archive saved to.
Restore from Backup
A database that has been archived, can later be restored using this dialog box.
When Restore From Backup… is selected, the user is first prompted to
create a backup of the existing database. This is always recommended, since
the Restore function will over-write all existing show files and system
configuration data. Specify the location of the file.
Exit
Closes the DMXQConnect program. Note that when QConnect is re-launched,
the last open show file is automatically opened.
V IEW M ENU
DMXPathfinder Event Log F5
Opens the DMXPathfinder Event Log window, displaying a record of all
communications “events” and messages sent to or from the Pathfinder. This
will include patch commands, acknowledgements, and a date/ time stamp for
each message. Outgoing commands appear in green, while incoming
messages are in blue. Communication failures appear in red.
Log entries should be cleared from time to time, such as at the end of a
production run, or before setting up for a new show. This will keep the log
relevant and current. Click on the Clear Event Log button when you wish to
perform this function. Be warned, however, there us no “undo” function on this
operation.
Click on the Refresh button to redraw the log and go to the most recent event.
DMXPathfinder Control
This brings up a window with a number of displays relating to direct control of
the DMXPathfinder’s internal functions. Here you’ll find tabs for Terminal,
Patch Rack, System Loopback and Reset. Full instructions can be found in
Chapter 5: Diagnostics and Troubleshooting.
DMXQConnect Options
This brings up a window with a number of displays relating to your preferences
when using DMXQConnect. You’ll find the following tabs: