Analog multiplex inputs disabled, Technical support – Pathway #8680 Ultimate Converter User Manual
Page 14

DMX Ultimate Converter
User’s Manual
A
NALOG
M
ULTIPLEX
I
NPUTS
D
ISABLED
The
DMX Ultimate Converter
is shipped with its analog multiplex
input
capability disabled. The 3
input protocols affected are AMX192, D54 and Microplex. Although the mode selection for these
inputs will permit their assignment, the unit hardware as shipped will not. If it is necessary to enable
analog multiplex inputs, the user must remove the top cover and move the 20-pin chip labeled
“Spare A/D Chip” to the U17 socket position. Care must be taken to ensure that the chip faces the
same direction as all others, and that no pins are bent when it is inserted.
T
ECHNICAL
S
UPPORT
Your first contact for support should be the dealer that provided your
DMX Ultimate Converter
.
However, you should also feel free to contact Pathway Technical Support if you need help.
9:00 – 5:00 (Mountain Time) Monday through Friday
+1 403-243-8110
[email protected]
14