AZEK Pavers - Manual (Page 8)

Page 8
3
CUTTING INDIVIDUAL GRIDS AND PAVERS
• Pavers can be cut to any shape using a jigsaw or miter saw, and a low
tooth count wood ripping blade.
• If using a miter saw, it works best to place the paver on a grid while
cutting it. This allows the person cutting the product to both have more
support holding the paver and keeps their fingers farther away from
the blade. Short, quick motions with a miter saw also work better. Slow,
continuous cuts may cause binding and warping of the blade.
• For pavers cut to dimensions smaller than half a paver, adhere the paver
to the grid using a recommended adhesive.
• Use the recommended cutting equipment (see page 2). For more info,
visit: http://www.azek.com/azek-pavers/pavers-cutting-equipment.aspx
IMPORTANT: Always
wear safety glasses
and ear plugs when
trimming pavers or
grids. Obey all
safety and operational
instructions that
came with the cutting
equipment.
Installation Instructions - All Applications