Asus CUV266-DLS - Manual (Page 69)

ASUS CUV266-DLS User’s Manual 69
4. BIOS SETUP
4. BIOS SETUP
AC PWR Loss Restart [Disabled]
This allows you to set whether you want your system to reboot after the
power has been interrupted. [Disabled] leaves your system off and [Enabled]
reboots your system. [Previous State] sets your system back to the state it is
before the power interruption. Configuration options: [Disabled] [Enabled]
[Previous State]
PWR Up On External Modem Act [Disabled]
This allows either settings of [Enabled] or [Disabled] for powering up the
computer when the external modem receives a call while the computer is in
Soft-off mode. NOTE: The computer cannot receive or transmit data until
the computer and applications are fully running. Thus connection cannot be
made on the first try. Turning an external modem off and then back on while
the computer is off causes an initialization string that will also cause the
system to power on. Configuration options: [Disabled] [Enabled]
Wake On LAN or PCI Modem [Disabled]
Configuration options: [Disabled] [Enabled]
Wake Up By USB Device [Disabled]
Configuration options: [Disabled] [Enabled]
Wake Up By Keyboard [Space Bar]
Configuration options: [Disabled] [Space Bar]
Power Up on PS2 KB/Mouse [Disabled]
Set this field to [Enabled] if you want to use your PS/2 keyboard or PS/2
mouse to power up the computer. Configuration options:[Enabled] [Disabled]
4.5.1 Power Up Control
Power Up Control