Asus CUV266-DLS - Manual (Page 17)

ASUS CUV266-DLS User’s Manual 17
3. HARDWARE SETUP
3. H/W SETUP
Motherboard Settings
Motherboard Frequency Settings (DIP Switches)
The motherboard frequency is adjusted through the DIP switches. The white block
represents the switch’s position. The illustration below shows all the switches in the
OFF position.
1) JumperFree™ Mode (JEN)
This jumper allows you to enable or disable the JumperFree™ mode. The
JumperFree™ mode allows CPU external frequency settings to be made through
the BIOS setup (see 4.4 Advanced Menu).
Setting JEN
Enable (JumperFree) [2-3] (default)
Disable (Jumper) [1-2]
NOTE: In JumperFree™ mode, set all DIP switches (DIP_F) to OFF.
®
CUV266-DLS
0 1 0 1 0 1 0 1
CUV266-DLS DIP Switches
1. Frequency Selection
2. Frequency Selection
3. Frequency Selection
4. Frequency Selection
5. Frequency Selection
OFF
DIP_F
ON
1 2 3 4 5 ON
5 4 3 2 1
ON
®
CUV266-DLS
0 1 0 1 0 1 0 1
CUV266-DLS JumperFree™ Mode Setting
Jumper Mode JumperFree Mode
(Default)
JEN
OFF
2 3 1 2
DIP_F
ON
1 2 3 4 5 ON
5 4 3 2 1