Bios setup, 1 primary & secondary master/slave – Asus CUV266-DLS User Manual

Page 53

Text mode
Original mode

ASUS CUV266-DLS User’s Manual

4. BIOS SETUP

4. BIOS SETUP

4.3.1 Primary & Secondary Master/Slave

Master/Slave Drives

Type [Auto]

Select [Auto] to automatically detect an IDE hard disk drive. If automatic
detection is successful, Setup automatically fills in the correct values for
the remaining fields on this sub-menu. If automatic detection fails, this
may be because the hard disk drive is too old or too new. If the hard disk
was already formatted on an older system, Setup may detect incorrect
parameters. In these cases, select [User Type HDD] to manually enter the
IDE hard disk drive parameters. Refer to the next section for details.

CAUTION!

Before attempting to configure a hard disk drive, make sure you

have the configuration information supplied by the drive manufacturer. Incorrect
settings may cause the system to fail to recognize the installed hard disk.