Hardware setup, 6 central processing unit (cpu) – Asus CUV266-DLS User Manual
Page 25
ASUS CUV266-DLS User’s Manual
25
3. HARDWARE SETUP
3.6 Central Processing Unit (CPU)
The motherboard comes with dual Socket 370 for the Intel Pentium III Coppermine
CPUs listed in 2.1.1 Specifications. The following illustration shows the CPU socket
location on the motherboard and the correct CPU orientation.
Note in the illustration that CPUs have marks (usually a notch or a gold mark on one
corner) to help you identify the proper orientation and enable you to correctly install
a CPU. It is important that you match the marked corner of the CPU with the
corresponding corner on the socket so as not to damage the CPU pins.
The CPU picture above is for reference only. Usually, when you buy a CPU, the
heatsink and fan are already attached to the CPU. If a heatsink and fan did not come
with the package, make sure you obtain one before installing the CPU.
Proceed to the next section for the steps on how to properly install a CPU.
CAUTION!
Be careful not to scrape the motherboard when mounting/unmounting
a clamp-style processor fan to avoid damaging the motherboard.
WARNING!
You must install the proper heatsink and fan to the CPU. Failure to
do so will cause the CPU to overheat and may damage both the CPU and the
motherboard. Install an auxillary fan, if necessary.
CPU
3. H/W SETUP
®
CUV266-DLS
0
1
0
1
0
1
0
1
CUV266-DLS Socket 370
Gold Arrow
Pentium III