Asus CUV266-DLS - Manual (Page 66)

ASUS CUV266-DLS User’s Manual 66
4. BIOS SETUP
4. BIOS SETUP
IRQ XX Used By ISA [No/ICU]
These fields indicate whether or not the displayed IRQ for each field is
being used by a legacy (non-PnP) ISA card. The setting [No/ICU] for an
IRQ field indicates that you are using the ISA Configuration Utility (ICU),
and that this particular IRQ is NOT required by a legacy ISA card. Set the
IRQ field to [Yes] if you install a legacy ISA card that requires a unique IRQ
and you are NOT using ICU. Configuration options: [No/ICU] [Yes]
PCI Configuration
ONB SCSI BIOS First [Yes]
When set to [Yes], this field allows the onboard SCSI BIOS to start up
before the PCI devices. When set to [No] ,the onboard SCSI starts up after
all the PCI devices have been initialized. Configuration options: [No] [Yes]
USB Function [Enabled]
Set this field to [Enabled] if you want to use Universal Serial Bus devices.
Configuration options: [Disabled] [Enabled]
Primary VGA BIOS [PCI Card]
This field allows you to select the primary graphics card. Configuration
options: [PCI Card] [AGP Card]
Onboard LAN Boot ROM [Disabled]
This field allows you to enable or disable the option ROM in the onboard
LAN chipset. Configuration options: [Disabled] [Enabled]
PCI IRQ Resource Exclusion