Pulsafeeder Pulsa Series Cruise Control - Manual (Page 7)

3. Cruise Control
™
Typical Internal Panel Layout
3.1 Cruise Control
™
typical components
Refer to Figure 1, below
1. Non-fused disconnect and incoming power terminal blocks.
2. Circuit breakers (main, drive, components, etc.)
3. Control or Isolation Transformer (if needed)
4. Control system relays (drive start, fault, etc.)
5. DC Drive (with armature contactor if needed)
6. Terminal block (internal and field terminations)
7. Signal isolator (for 4-20mA incoming speed signal)
1
3
2
5
4
6
7
FIGURE 1
3