Pulsafeeder Pulsa Series Cruise Control - Manual (Page 4)

Conventions:
A warning defines a condition that could cause damage to both the equipment and the personnel
operating it. Pay close attention to any warning
.
Notes are general information meant to make operating the equipment easier.
Safety Considerations:
1. Disconnect power to control panel and related equipment during installation, maintenance, and repairs.
2. Wire and ground this control panel and all related equipment in accordance with all local and national
electrical codes.
3. Read and understand all related instructions and documentation before attempting to install or maintain
this equipment
4. Observe all special instructions, notes, and cautions.
5. Act with care and exercise good common sense and judgment during all installation, adjustment, and
maintenance procedures.
6. Be sure the equipment enclosure is securely closed during operation to prevent accidents and
unauthorized access.
7. Remember that operation of this control panel may cause movement or rotation of other system
components. Performing certain adjustment procedures may require that the attached chemical pump be
running and therefore dispensing liquid into a system. Be aware of the consequences of your actions.
8. Ensure that all safety and work procedures and standards that are applicable to your company and facility
are followed during the installation, maintenance, and operation of this equipment.
Installation, maintenance, and repair of your Cruise Control ™ variable speed control panel
should be performed or supervised by a certified electrician in accordance with the host facility’s
site safety standards. Serious injury to equipment and/or personnel can result from improper
installation or operation of this equipment.
iv