Pitco Frialator SRTG14-2 Dual Gas Rethermalizer - Manual (Page 25)

SRTG: Gas Floor Model Rethermalizer
PREVENTATIVE MAINTENANCE
21
 Check ignition system and adjust pilot flame as required.
Check flame sensor reading.
Matchless Ignition: Check gap spacing and clean igniter.
 Recheck for gas leaks after inspection.
3.4. VENTILATION HOOD
Proper ventilation hood operation is very important for the correct operation of this appliance and the
safety of personnel. The ventilation hood should be inspected at the time of installation of this
appliance to insure that it will operate properly in conjunction with the appliance. A regular schedule
of examination, in accordance with ANSI/NFPA 96 latest edition and/or local codes must be followed.