Pitco Frialator SRTG14-2 Dual Gas Rethermalizer - Manual (Page 13)

SRTG: Gas Floor Model Rethermalizer
INSTALLATION
9
1) Probe
2) High Temperature Limit
1.8. INSPECTION
Before you begin filling and adjusting the appliance, perform the following visual checks:
 After the appliance is in its permanent location, check the levelness. Any additional leveling that
is necessary can be performed as previously described.
 Ensure that the probe, and high temperature limit is in place and secure. Check the high limit
bulb mounting screws to ensure that they are tight.
 Review the installation portion of this manual and ensure that all steps have been followed and
executed properly.