Resetting the trip distance-2 – CatEye CC-GL10 [Stealth 10] User Manual

Page 10

How to use the

computer

Resetting the measurement data and generating

the trip data

Holding down the MODE button with the measurement screen

displayed resets the measurement data to 0 (resetting operation).

All the measurement data up to that time are generated as trip data.

You can view measurement results and store trip records, by up-

loading the trip data to the special website “CATEYE Atlas™” via the

dedicated software application “CATEYE Sync™”.

1 day

2 day

3 day

4 day

5 day

6 day

Trip data for the 1st

day are generated.

Trip data to

be generated

Resetting

operation

Trip days

Trip data for the 2nd day to the

4th day are generated.

Trip data is not yet generated.

MODE

Resetting

operation

MODE

Resetting

operation

* A trip is continued unless the resetting operation is performed, even if the power is turned

off during measurement.

* The trip distance-2 (Dst2) is not reset to 0, since it is to be reset separately.

For details, see “Resetting the trip distance-2” below.

* The total distance (Odo) cannot be reset.
* For information on how to upload to the CATEYE Atlas™, see “Uploading the measurement

data (trip data)” (page 13).

* The unit has a limited memory capacity. When the data volume exceeds the memory capaci-

ty, any new data can no longer be stored. For details, see “Record interval and capacity limit”

(page 16).

Resetting the trip distance-2

Pressing and holding the MODE button with the trip distance-2

(Dst2) displayed resets only the trip distance-2 data to 0.
* The trip distance-2 (Dst2) value cannot be saved as trip data.

MODE

(press & hold)