CatEye CC-TR300TW [V3] - Manual (Page 11)

ENG-21
ENG
ENG-20
LAP LAP
TM
Start of
measurement
Lap time 1
Split time 1
Split time 2
Lap time 2
Beep
M2/- M2/-
(For 2 seconds)
Lap time and split time
The lap time displays elapsed time from the last
press of the LAP button.
The split time displays the elapsed time from the
start of measurement to the point LAP button is
pressed.
* The measured lap data is saved to a file when you perform a reset operation (page 17)
and can be reviewed in “File view” (page 24).
* Pressing the LAP button while the total number of laps reaches 99 points displays the lap
data, but “--” appears in place of the lap number indicating further recording is impossible.
Advance use of the real time lap data
For the real time lap data indicated in the lower dis-
play, the unit starts/stops measurement in sync with
the main time measurement; however, it resets and
restarts the data every time you press the LAP but-
ton.
This independent feature of lap time can be useful
also for intervals and sectional trials such as hill
climb section.
Countdown distance
The countdown distance feature displays the countdown distance to a
predetermined target trip distance, and notifies when it reaches zero.
When it reaches the target trip distance, the unit switches any mea-
surement data to the countdown data, and notifies it by flashing the
numeric/dot display and an alarm sound.
Example of how the countdown distance is used
1. Entering the race event distance
For distance system events such as a road race and
century ride, enter the race event distance before the
start, and develop your strategy and pace based on the
countdown distance during the race.
2. Entering the destination sign distance
For touring, enter the sign distance whenever you encounter a destination sign
along the road, and develop your pace based on the countdown distance.
3. Entering the periodical target distance
Enter the periodical target distance for a week, month, or year to check your progress.
* The target trip distance is set from the menu screen “Setting the countdown distance”
(page 32).
In case of 20 km
When reached
(displays for 5
seconds)
1
2
5
3
4
6
7
8
LAP
Pace function
2 types of pace arrow icons for the current speed and the heart rate
are displayed on the screen.
These arrow icons indicate whether the current speed (heart rate) is
above or below the average speed (average heart rate).
: Appears when the current value is above the average.
: Appears when the current value is below the average.
No arrows : When the current value is equal to the average, or zero.
Lap function
Pressing the LAP button on the measurement screen during measurement records the
measurement data between a given set of points (average lap speed/maximum lap speed,
average lap heart rate/maximum lap heart rate, lap time/split time, and trip lap distance)
up to 99 points. Immediately after recording, the lap data are displayed in the order as
shown below, and then return to the measurement screen.
Measurement
screen
Current speed
Heart rate
1 Average lap speed
2 Average lap heart rate
Displays the average lap speed (average
lap heart rate) from the previous point
(for L-01: from the start of measure-
ment).
3 Lap number
Displays the lap number just recorded.
* When the total number of laps exceeds
99 points, “--” appears indicating fur-
ther lap recording cannot be done.
4 Trip lap distance
Displays the trip lap distance from the
previous point (for L-01: from the start
of measurement).
Lap data
5 Lap time
Displays the elapsed time from the
previous point (for L-01: from the start
of measurement).
6 Maximum lap speed
7 Maximum lap heart rate
Displays the maximum lap lap speed
(maximum lap heart rate) from the
previous point (for L-01: from the start
of measurement).
8 Split time
Displays the total elapsed time from the
start of measurement.
2.5 sec. 2.5 sec.
Measurement
screen