CatEye CC-TR300TW [V3] - Manual (Page 10)

ENG-19
ENG
ENG-18
0 q w
e
r
t
y
M2/-
M2/-
M2/-
M2/-
M2/-
M2/-
M2/-
M2/-
M2/-
Elapsed time
Displays the elapsed time from the start of measurement to the 1/10 second.
When it exceeds 99:59’59”, it repeats from 00’00”0.
* When the elapsed time reaches 1 hour, the 1/10 second is not displayed.
Trip distance
Displays the trip distance from the start of measurement.
Countdown distance (page 21)
Displays the countdown distance to the target distance.
0 Lap number (page 20)
Displays the number of current lap.
q Average lap speed in real time
Displays the average lap speed of the current lap in real time.
w Lap timer
Displays the elapsed time of the current lap in real time.
Trip lap distance in real time
Displays the trip distance of the current lap in real time.
e Date
Displays the day, month, and year (last 2 digits).
* Display format is different depending on display set up.
r Clock
Displays the current time of day in the 24- or 12-hour system.
Calorie Consumption
Displays the estimated calorie consumption from the start of mea-
surement based on the heart rate.
t Total time
The total time is accumulated time since purchase. It can only be
reset with Format (page 11).
y Total distance
The total distance is accumulated distance. It is updated indepen-
dently of starting/stopping measurement.
It can be edited to desired value.
Lower display data
(2 sec.)
1
2 3
4
5 6
7
8 9
M1/+
M1/+
M1/+
1 Current speed
Displays the current speed.
Updated every second.
2 Heart rate
Displays the heart rate in real time.
Updated every second.
3 Cadence
Displays the number of pedal rotations per minute.
Updated every second.
4 Average speed *1
Displays the average speed after the start of measurement.
5 Average heart rate *2
Displays the average heart rate after the start of measurement.
The average will not be reflected when the heart rate is not
measured.
6 Average cadence *3
Displays the average cadence after the start of measurement.
The average will not be reflected when you stop pedaling.
7 Maximum speed
Displays the maximum speed after the start of measurement.
Updated independently of starting/stopping measurement.
8 Maximum heart rate
Displays the maximum heart rate after the start of measurement.
Updated independently of starting/stopping measurement.
9 Maximum cadence
Displays the maximum cadence after the start of measurement.
Updated independently of starting/stopping measurement.
Measurement screen
Upper and middle display data
*1: When the trip distance (DST) exceeds 10,000 km [mile], or the elapsed time (TM) exceeds
100 hours, [E] appears indicating further measurement is impossible. Clear the data by
resetting (page 17).
*2: This device stops calculating the average when the heart rate sensor is detached, and re-
sumes the calculation when the heart rate sensor is worn again. This feature produces
actual averages with the heart rate sensor worn.
*3: This device calculates the average excluding the time when you stop pedaling. This feature
produces actual averages, which are different from those with conventional models that
calculate it for the entire measurement time period.