Panasonic MotionSD STUDIO 1.0E - Manual (Page 61)

Edit mode
- 61 -
Non-linear edit mode
Trimming clips
You can cut the unnecessary beginning and/or ending
portions of a video clip or a still image clip arranged on the
edit track.
You can use the Mark in or Mark out buttons or directly
enter the time code.
1. Adjust the display width of a clip in .
• When trimming, it is convenient to show the edit track
in time profile display. ( @ 38 )
2. Select the clip to be trimmed.
3. Click the point at which you wish to start the
clip and move the Current bar (
).
4. Click .
The video before the start point set is cut.
5. Click the point at which you wish to end the
clip and move the Current bar (
).
6. Click .
The video after the end point set is cut.