Panasonic DMC-GH4KBODY - Manual (Page 84)

84
Wi-Fi/NFC
VQT5H68 (ENG)
1 Press [Wi-Fi].
2 Select [New Connection].
3
Select the connection method.
4 Select [PC].
5 Select the connection method.
Example: Selecting [WPS (Push-Button)] to set up a connection
1Select [Via Network].
2Select [WPS (Push-Button)].
3Press the wireless access point WPS button until it switches to
WPS mode.
6
On the camera, perform the operation that matches your
purpose.
¢ When the PC you want to connect to is not displayed, select [Manual Input], and enter the
computer name of the PC (NetBIOS name for Apple Mac computers).
• To change the setting or disconnect, press [Wi-Fi]. (P75)
• Folders sorted by the sent date are created in the specified folder, and pictures are saved in
those folders.
• If the screen for a user account and password entry appears, enter the one you set on your PC.
• When the computer name (NetBIOS name for Apple Mac computers) contains a space (blank
character), etc., it may not be recognized correctly.
If a connection attempt fails, we recommend that you change the computer name (or NetBIOS
name) to the one consisting of only alphanumeric characters, with a maximum of
15 characters.
Sending an image each time a recording is made
([Send Images While Recording])
Available file format: JPEG/RAW/MPO
Select and send the images
([Send Images Stored in the Camera])
Available file format: ALL format
Sending an image each time a recording is made
([Send Images While Recording])
1 Select the PC you want to connect to and the destination
folder. ¢
2 Take a picture with the camera.
Select and send the images
([Send Images Stored in the Camera])
1 Select the PC you want to connect to and the destination
folder. ¢
2 Select [Single Select] or [Multi Select], and then select
the images you want to send.
ョㄏヒ
ヸㄊノョㄊ
DMC-GH4_PPC-VQT5H68_eng.book 84 ページ ２０１４年３月１２日 水曜日 午後１０時３５分