Panasonic DMC-FZ200K - Manual (Page 63)

- 63 -
Basic
• Press the shutter button halfway or turn the camera off and on to cancel [Sleep Mode].
• [Sleep Mode] is set to [5MIN.] in the Intelligent Auto Mode.
• Press any button to turn on the LCD monitor again.
• [Sleep Mode] does not work in the following cases.
– When using the AC adaptor
– When connecting to a PC or a printer
– When recording or playing back motion pictures
– During a slide show
– [Auto Demo]
• [Auto LCD Off] does not work in the following cases.
– When using the AC adaptor
– When connecting to a PC or a printer
– Intelligent Auto Mode
– While the Self-timer is set
– When recording or playing back motion pictures
– During a slide show
– While the menu screen is displayed
– [Auto Demo]
• [Sleep Mode] is fixed to [2MIN.] when [Auto LCD Off] is set to [15SEC.] or [30SEC.].
• When [Live View Mode] is set to [ECO] the image quality on the recording screen may be worse than
when it is set to [NORMAL], but this does not affect the recorded image.
• When [Live View Mode] is set to [NORMAL], the usage time is reduced.
[Economy]
You can conserve the battery life by setting these menus.
Also, it will turn off the LCD monitor automatically when not in use to
prevent discharge of the battery.
[Sleep Mode]:
The camera is automatically turned off if the camera has not been
used for the time selected on the setting.
[10MIN.]/[5MIN.]/[2MIN.]/[1MIN.]/[OFF]
[Auto LCD Off]:
The LCD monitor is automatically turned off if the camera has not been
used for the time selected on the setting.
[30SEC.]/[15SEC.]/[OFF]
[Live View Mode]:
Sets the LCD monitor to display in such a way that power consumption
is reduced.
[NORMAL]/[ECO]
[Play on LCD]
If you selected the Viewfinder in a Recording Mode, the display will
automatically switch to the LCD monitor when playing back the
pictures.
[ON]
[OFF]