Wide conv. lens set, Wind noise canceler, Lowcut – Panasonic HC-W850K User Manual
Page 78
- 78 -
This will change the setting of the Image Stabilizer function to the one appropriate for the recording
when a Wide Conversion Lens (optional) is attached to this unit.
≥ The following functions will not work:
j Night Portrait in Intelligent Auto/Intelligent Auto Plus
j Built-in flash
j Red-eye Reduction
j Video light
j AF ASSIST LAMP
j
Night Mode ([Infrared])
This will reduce the wind noise coming into the built-in microphones while maintaining the realism.
≥ Switch to Manual Mode. (
)
≥ When [Strong] is set, you can check how effectively the wind noise is reduced with the icon
displayed on the screen. In descending order of the strength of the reduction effect,
/
/
/
is displayed.
≥ When [Normal] is set,
will be displayed on the screen.
≥ This function’s default setting is [Normal].
≥ When switching to Intelligent Auto Mode or Intelligent Auto Plus Mode, [Wind Noise Canceler] is
set to [Strong], and the setting cannot be changed.
≥ You may not see the full effect depending on the recording conditions.
≥ This function cannot be set when using an external microphone.
This function reduces the low-pitched sound when using an external microphone.
≥ Switch to Manual Mode. (
)
≥ This function can be set only when using an external microphone.
[WIDE CONV. LENS SET]
: [RECORD SETUP]
# [WIDE CONV. LENS SET] # [ON]
[Wind Noise Canceler]
: [RECORD SETUP]
# [Wind Noise Canceler] # desired setting
[Strong]:
When a strong wind is detected, this option effectively reduces the
wind noise by minimizing the low-pitched sound.
[Normal]:
This option extracts and reduces only the wind noise without
deteriorating the sound quality.
[OFF]:
Cancel the setting.
[LOWCUT]
: [RECORD SETUP]
# [LOWCUT] # [ON]
MENU
HC-W850
MENU
MENU