Panasonic HC-W850K - Manual (Page 144)

- 144 -
Using [Home Cam]
≥ Perform the home monitoring operation on the smartphone. ( l 148 )
≥ When the firewall is turned on, the Wi-Fi function may not work correctly. If this occurs, check the
network settings.
∫ If the device is Android (NFC-compatible)
≥ Set the NFC function of the smartphone to ON.
1
Turn off the Wi-Fi setting of the smartphone.
2
Start up the smartphone application “Image App”.
≥ When a Wi-Fi connection guidance screen is displayed, select [NO].
3
Enable the home monitoring setting from the menu of the smartphone
application “Image App”.
≥ Select [ (MENU)] # [Application function] # [Home Monitor], and enable [Use Home
Monitor].
4
Select [Set connect. dest.] of the smartphone.
5
Touch the smartphone on of this unit.
≥ If this is the first time the smartphone is connecting to this unit,
touch [YES] on the screen of this unit, and then touch the
smartphone on
of this unit again.
≥ If the unit is not recognized even when touching the
smartphone, change positions and try again.
≥ Check that the message “Connecting...” has disappeared from this unit.
6
When [Start “Home Cam”?] is displayed on the smartphone, select [YES].
7
Start home monitoring.
∫ Connecting with Android (non-NFC-compatible) or iOS device
1
Press Wi-Fi button and touch [Home Cam].
2
Turn off the Wi-Fi setting of the smartphone.
3
Start up the smartphone application “Image App”.
≥ (If the device is Android)
When a Wi-Fi connection guidance screen is displayed, select [No].
≥ (If the device is iOS)
If a confirmation message for the Wi-Fi setup is displayed, select [Close].
4
Enable the home monitoring setting from the menu of the smartphone
application “Image App”.
≥ Select [ (MENU)] # [Application function] # [Home Monitor], and enable [Use Home
Monitor].
When using the home monitor function for the first time