ADTRAN L128 User Manual
Page 175
Appendix F: Frame Relay Firmware Version
158
Express L128/L128T User Manual
61202.070L1-1
IPXCP
- Shows UP if PPP IPX Control Protocol has negotiated
successfully
User
- Displays the user name of the PPP peer
Number(s)
- Shows the phone number dialed if outgoing call or caller
ID if incoming call.
Connect Time
- Shows the date and time when the call last connected.
Up Time
- Displays how long the call has been connected.
Tx Pkts
- Number of packets transmitted
Rx Pkts
- Number of packets received
Tx Bytes
- Number of bytes transmitted
Rx Bytes
- Number of bytes received
Tx Rate
- Current application data transmission rate
Rx Rate
- Current application data reception rate
Tx Link Rate
- Current actual data transmission rate
Rx Link Rate
- Current actual data reception rate
Sessions/DLCI Table
The status of all virtual circuits is displayed here.
DLCI
- The DLCI that is associated with this virtual circuit.
State
- The state of the virtual circuit:
Inactive
- means the circuit exists but has been deactivated by
the Frame Relay switch.
Exists
- means the circuit exists at this point and should be
activated soon.
Active
- means the circuit is fully active.
Off
- means the circuit has been turned of by the DLCI mapping
active selection.
Tx Frames
- Number of Frame Relay packets that have been
transmitted via this DLCI.