ADTRAN L128 - Manual (Page 151)

Appendix B: Log Messages
134 Express L128/L128T User Manual 61202.070L1-1
Retrieved
level 5
The Express L128/L128T has retrieved a previously held call. If no caller ID is
available for the ISDN line, then will be blank for incoming calls.
Ring
level 5
An incoming call from was ringing. If no caller ID is available for
the ISDN line then will be blank.
SOURCE NOT ISDN
level 4
The incoming calling party is not ISDN. This is a warning and is most often
seen for POTS calls.
Signal 0xNN
level 4
A signal information element was received from the ISDN switch with the val-
ue NN in hexadecimal.
Transfer
level 5
The Express L128/L128T has transferred the held call with the active call. If
no caller ID is available for the ISDN line, then will be blank for in-
coming calls.
Transfer Rej
level 5
The Express L128/L128T attempted to transfer but was rejected by the ISDN
switch. If no caller ID is available for the ISDN line, then will be
blank for incoming calls.
Network Log Messages
Attempting to add bad IP iface route: ifnum= dest=
level 4
An IP address could not be used for the interface number .
DHCP couldn't alloc mem
level 1
A DHCP response could not be generated due to memory allocation problems.