Sony MZ-R900 - Manual (Page 41)

41
-GB
On the remote control
1
Press DISPLAY while playing.
Each time you press DISPLAY, the
display changes as follows.
Display window on the remote control
Indication C/D
Track number/Elapsed time
r
Track number/Track name
1)
r
The number of tracks in the disc/
Disc name
1)
r
— /Recorded time
2)
1) Appears only if the track has been labeled.
2) Appears only when the clock is set.
z
• If you want to check the remaining time or the
recording position while recording or in stop
mode, see page 29.
• The display that appears on the recorder is
different from the ones on the remote control.
See “ On the recorder” (page 40) to check the
display that appears on the recorder.
Connecting to a stereo
system (LINE OUT)
Connect the i/LINE OUT jack of the
recorder to the LINE IN jacks of an
amplifier or a tape player with a line
cable. For more information on line
cables, see “ Optional accessories”
(page 68). The output is analog. The
recorder plays the MD digitally and sends
analog signals to the connected
equipment.
When connecting a line cable to the i/
LINE OUT jack of the recorder, be sure to
set the “ AUDIO OUT” parameter for the
i
/LINE OUT jack.
1
Press the jog lever (L), flip the lever
until “ AUDIO OUT” flashes in the
display, and then press the lever
again.
2
Flip the jog lever (L) until “ LINE
OUT” flashes in the display, and then
press the lever.
DISPLAY
C D
Portable DAT
recorder Stereo system,
etc.
to LINE IN
2 phono plugs
L
(white)
Stereo mini-plug
R
(red)
RK-
G136
to i/LINE OUT
RK-
G129
Jog lever (L)