Sony MZ-R900 - Manual (Page 40)

40
-GB
Checking the remaining
time or the playing
position
You can check the track name, disc name,
etc. during playback.
On the recorder
1
While the recorder is playing, press
the jog lever (L), flip the lever until
“ DISPLAY” flashes in the display,
and then press the lever again.
2
Flip the jog lever (L) until the
information you want flashes in the
display.
Each time you flip the lever, the
display changes as follows.
LapTime (The elapsed time.)
r
1 Remain (The remaining time of
the current track.)
r
AllRemain (The remaining time
after the current location.)
r
RecDate (Recording date and
time.)
3
Press the jog lever (L).
The display changes as follows.
Display window on the recorder
z
The display that appears on the remote control
is different from the ones on the recorder. See
“ On the remote control” (page 41) to check the
display that appears on the remote control.
Jog lever (L)
A B
Track number Elapsed time
Track number 1)
1) If the track is labeled, “ ” appears in the
display followed by the track name.
Remaining time of
the current track
Number of tracks
after the current
track
2)
2) If the disc is labeled, “ ” appears in the
display followed by the disc name.
Remaining time
after the current
location.
Recorded date 3)
3) Appears only when the clock is set.
Recorded time 3)
A B