Alamo RHINO 7214 MSL - Manual (Page 2)

TO THE OWNER/OPERATOR/DEALER
All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded
operator who recognizes the potential hazards and follows reasonable safety practices. The manufacturer has
designed this implement to be used with all its safety equipment properly attached to minimize the chance of
accidents.
BEFORE YOU START!! Read the safety messages on the implement and shown in your manual. Observe
the rules of safety and common sense!
Read and understand the complete Warranty Statement found in this Manual. Fill out the Warranty Registration Form in full
and return it within 30 Days. Make certain the Serial Number of the Machine is recorded on the Warranty Card and on the
Warranty Form that you retain. The use of “will-fit’ parts will void your warranty and can cause catastrophic failure with
possible injury or death.
SAFETY HAZARD SIGNAL WORDS
There are three levels of hazard intensity identified by signal words
DANGER, WARNING and CAUTION. The level of hazard
intensity is identified by the following definitions.
DANGER
DANGER - Immediate hazards which will result in severe
injury or death.
WARNING
WARNING - Hazards or unsafe practices which could result in
minor personal injury or death.
CAUTION
CAUTION - Hazards or unsafe practices which could result in
minor personal injury or property damage.
THIS SAFETY SYMBOL MEANS
ATTENTION!
BECOME ALERT!
YOUR SAFETY IS
INVOLVED!
PELIGRO
LEA EL INSTRUCTIVO
Si No Lee Ingles, Pida Ayuda a Alguien Que
Si Lo Lea Que le Traduzca las Medidas de
Seguridad.