Sony DSC-U10 - Manual (Page 76)

76
For Macintosh users
Follow the steps below, according to your OS.
1 Installing the USB driver and
ImageMixer
* For Mac OS 8.5.1, 8.6, or 9.0 users only
1 Turn on your computer, and set the supplied CD-
ROM into the CD-ROM drive.
The “PIXELA ImageMixer” screen appears.
2 Double-click (Setup Menu).
3 Click (USB Driver).
The “USB Driver” screen appears.
4 Double-click the icon of the hard disk containing the
OS to open the screen.
5 Drag and drop the following two files from the
screen opened in step 3 into the System Folder icon
in the screen opened in step 4.
• Sony USB Driver
• Sony USB Shim
6 When the message for confirmation is shown, click
“OK.”
7 Select the desired language.
8 Follow the instructions on each succeeding screen.
9 Restart your computer and remove the CD-ROM
from the CD-ROM drive.
2 Preparing your camera
For details, see page 67.
3 Connecting your camera to your
computer
For details, see page 68.
Removing the USB cable from your computer or
the “Memory Stick” from your camera during a
USB connection
Drag and drop the drive icon of the “Memory Stick” to
the “Trash” icon, then remove the USB cable or
“Memory Stick.”
* If you are using Mac OS X, remove the USB cable, etc., after
you have turned your computer off.
OS Steps
Mac OS 8.5.1/8.6/9.0 Steps 1 to 5
Mac OS 9.1/9.2/Mac OS X
(v10.0/v10.1) Steps 2 to 5