Sony DSC-U10 User Manual
Page 13
13
Gettin
g
started
•
Be sure to charge the Nickel Metal Hydride batteries
supplied with your camera before using them.
•
We recommend charging the batteries in an ambient
temperature of between 10°C to 30°C (50°F to 86°F). If the
batteries are charged in an environment where the temperature
is outside that range, the batteries may not charge efficiently.
•
Connect the battery charger to an easily accessible wall outlet
(wall socket) close by. Note that the battery charger is not
isolated from the power source (mains) even if the CHARGE
lamp is off. If some trouble occurs while using the charger,
immediately shut off the power by disconnecting the plug out
of the wall outlet (wall socket).
,
Connect the charger to a wall outlet (wall
socket) using the power cord (mains
lead).
The CHARGE lamp lights up when charging begins,
and goes off when charging is completed. It takes about
13 hours to completely charge the batteries.
•
When charging is finished, disconnect the power cord (mains
lead) from the wall outlet (wall socket), and remove the
Nickel Metal Hydride batteries from the charger.
•
Always use the case supplied when transporting the Nickel
Metal Hydride batteries. If the positive and negative
terminals come into contact with metallic material and are
shorted, the batteries could overheat or catch fire.
2
To the wall outlet
(wall socket)
Power cord
(mains lead)
CHARGE lamp