Sony DSC-U10 - Manual (Page 15)

15
Gettin
g
started
Charging time
This represents the time required to charge fully
depleted Nickel Metal Hydride batteries using the
supplied BC-CS1 charger in an environment where
the ambient temperature is 25°C (77°F).
• It takes about 13 hours to completely charge the batteries.
The CHARGE lamp may remain lit longer than 13 hours,
but this is not a malfunction.
• Do not remove the batteries while charging is still in
progress. If you remove the batteries while charging is
still in progress and then re-insert the batteries, the
charging process will start over from the beginning.
• If you use the ACC-UNQ STAMINA “Super Quick
charge” kit (not supplied), the batteries will charge faster.
Charging time
Size AAA Nickel Metal Hydride batteries
2 batteries: Approx. 1 hour 15 minutes
4 batteries: Approx. 2 hours 30 minutes
Battery remaining indicator (when
using Nickel Metal Hydride batteries)
As the battery power decreases with use, the battery
remaining indicator displays the amount of power
remaining using the following symbols.
• If the LCD screen display is off, set [DISPLAY] in [ ]
to [ON] with MENU and v/V on the control button to turn
it on.
• Based on the conditions under which the camera is being
used and the state of the charge, or on the environment,
this information may not be correctly indicated.
• The battery remaining indicator is not displayed in USB
connecting.
Nickel Metal Hydride
battery Charging time
NH-AAA-DI × 2 (supplied) Approx. 13 hours
Battery
remaining
indicator
Battery remaining guidelines
Sufficient power remaining
Battery half full
Battery low, recording/playback will
stop soon.
Change the batteries for fully charged
ones, or charge these batteries.
(Battery remaining indicator flashes.)