Sony DHC-MD595 - Manual (Page 50)

50
Fade-in and Fade-out
Recording
1
Press FUNCTION repeatedly to switch
the function to MD.
2
Press PLAY MODE repeatedly until
both “SHUFFLE” and “PROGRAM”
disappear.
3
Press MENU/NO to display “Edit
Menu”.
4
Press – or + repeatedly until “S.F Edit?”
appears, then press ENTER/YES.
5
Press – or + repeatedly until “Fade In?”
or “Fade Out?” appears, then press
ENTER/YES.
6
Press . or > repeatedly until the
track number you want to change the
recording level appears, then press
ENTER/YES.
“Time 5.0s” appears in the display.
7
Press – or + repeatedly to change the
recorded level.
The recording level can be changed from
–12 dB to +12 dB, in 2 dB increments. While
monitoring the sound, change to the optimum
level while making sure that “OVER” does
not appear in the display at the loudest
portion.
Adjust the level so that
“OVER” does not appear
8
Press ENTER/YES.
“S.F Edit OK?” appears in the display.
9
Press ENTER/YES.
The deck starts recording over the existing
track. “S.F Edit: ** %” appears while the
track is being recorded. An amount of time
that is roughly equal to or longer than the
playback time of the track is required when
recording over the track. When the recording
finishes, “Complete!” appears in the display
for a few seconds.
Changing the recorded level
after recording (continued)