Sony DHC-MD595 - Manual (Page 43)

The MD Deck — Editing
43
8
Press ENTER/YES if point A is correct.
“Point B set” appears and playback for
setting the ending point of the portion to be
erased (point B) starts.
9
Continue playback until the deck
reaches point B, then press ENTER/
YES.
“A-B Ers” and “Point B ok?” appear
alternately and the deck repeats a portion of
the few seconds before point A and after
point B successively.
10
Press . or > repeatedly to find
point B.
The procedure is the same as step 6.
11
Press ENTER/YES if point B is correct.
“Complete!” appears for a few seconds and
the portion between point A and B is erased.
To cancel A-B Erase
Press MENU/NO.
Note
If “Impossible” appears, the specified portion cannot
be erased. This happens when you have edited the
same track many times. This is due to a technical
limitation of the MD system and is not a mechanical
error.
Moving recorded tracks
— Move Function
You can use this function to change the order of
any track on the disc. When you move tracks, the
tracks are automatically renumbered.
E.g.: Moving track 3 to position 2.
1 2 3
1 2 3
4
4
A
A C B D
B C D
2
3,4,5
1
3,4,5
3,4,6
continued
Track
number
Original
tracks
After
MOVE